H.DP.E. / P.P. 3 Piece Design
Ball Valve
Ball Valve designed in three piece
is made corrosion resistant Polypropylene
with PTFE (Teflon) seat and seal
are very economical, reliable and
ideal for present process Industries.
Being
3 piece Ball Valve, it has a definite
advantage over the Union type threaded
connection valves according to the
latest pumping systems.
Ball
Valves are fitted with M. S. Studs
directly moulded with P.P. as a
result not a single part which is
prone to corrosion is exposed to
any Chemicals. Hence they are ideal
for Acids, Alkalis, Solvents, Water,
Oil and Gases.
Ball
Valves are full-port type providing
100% flow and are trusted up to
150 lbs/10 Kg. Per sq cm2. They
can be used up to 1000c to 1100c
for frequent process. It also stands
with external and internal loads
of the pipe line.
Standard
Specification:
Body
:Polypropylene Teflon and EPDM/VITON
rubber gasket.
Colour :Industrial
Gray / Natural
End
:Flanged End as per BS-10 Table
‘D’ / ‘E’
/ ‘F’ or ASA-150 B 16.5,
DIN Standard.
Rating :Pressure
10 kg./Sq. cm2.
Also
Available:
•
Polypropylene Inspection
Glass
•
P.P. Non Return Valves, Check Valves
and Foot Valves.
•
Polypropylene Diaphragm Valves and
‘Y’ Type valves. |
